M60 Nickel-based Alloy & Titanium Alloy Turning
M60 Material & Process Overview
The M60 Stainless Steel Turning Insert Series utilizes an Advanced Nano-Composite Coating Technology. This innovative coating effectively addresses the performance limitations typically associated with M-class material machining.
Key Coating Properties:
Hardness: Up to 40 GPa (exceptionally high)
Thickness: 2.5 μm
M60 Nickel-based Alloy & Titanium Alloy Turning
Performance Advantages:
Exceptional Hardness & Wear Resistance: Significantly extends tool life.
Dramatically Improved Machining Efficiency: Enables higher cutting speeds and feed rates.
Reduced Production Costs: Lower cost-per-part due to extended tool life and increased productivity.
The Ideal Solution for Machining:
Nickel-based Alloy
Titanium Alloys (Ti Alloys)
M60 Specification Table
| M60 Turning Insert | |||
| model | Picture | model | Picture |
| TNMG160404/08-LS |  |
TNMG160404/08-MP |  |
| WNMG080404-LS |  |
WNMG080408-MP |  |
| WNMG080408-LS |  |
CNMG120404/08/12-MP |  |
| WNMG080408-SS |  |
TNMG160402/04/08-KMS |  |
| CNMG120404-LS |  |
WNMG080402/04/08-KMS |  |
| VNMG160404-LS |  |
CNMG120402/04/08-KMS |  |
| TNMG160408-MS |  |
VNMG160402/04/08-KMS |  |
| WNMG080408-MS |  |
WNMG080404-FP |  |
| CNMG120408-MS |  |
TPMT090202/04-LF TCMT110202/04-LF TCMT160404/08LF |
 |
| VNMG160408-MS |  |
CCMT060202/04/08-LF CCMT09T302/04/08-LF CCMT120404/08-LF |
 |
| DCMT070202/04-LF DCMT11T302/04/08-LF |
 |
||
| VBMT110302/04-LF VBMT160402/04/08-LF |
 |
||
M60 Nickel-based Alloy & Titanium Alloy Turning
M60
The Ideal Solution for Machining:
Nickel-based Alloy
Titanium Alloys (Ti Alloys)
M60 Nickel-based Alloy & Titanium Alloy Turning
